AromaMax 700 Premium Para-Soy Container Wax

AromaMax 700 Premium Para-Soy Container Candle Wax

AromaMax 700 is a premium para-soy wax blend designed for candle makers who want excellent fragrance performance, beautiful creamy tops, and reliable results. Combining approximately 52% soy wax with 48% paraffin, this pre-blended wax brings together the smooth appearance of soy and the strong scent throw of paraffin.

Ideal for both beginners and experienced candle makers, AromaMax 700 is formulated for container candles and typically requires just one pour. Its soft slab form makes cutting, measuring, and melting convenient for small batches or larger production runs.

Why Candle Makers Love AromaMax 700

• Excellent fragrance throw: Designed to deliver strong cold and hot scent performance.
• Smooth, creamy appearance: Creates an attractive opaque finish with good glass adhesion.
• Single-pour convenience: Typically produces smooth tops without a second pour.
• High fragrance capacity: Holds up to 12% fragrance oil, depending on the formulation.
• No additives required: Pre-blended and ready for fragrance and candle dye.
• Easy-to-handle slab form: Convenient for measuring and melting.

AromaMax 700 - At a Glance

• Best use:  Container candle
• Wax blend:  Approximately 52% soy / 48% paraffin
• Appearance:  Smooth, creamy, opaque
• Form:  Soft slab
• Melt point:  Approximately 125°F
• Recommended fragrance starting range:  8 - 10%
• Maximum fragrance capacity:  Up to 12%
• Melting temperature:  175 - 185°F
• Fragrance addition:  Approximately 175 -185°F
• Pouring temperature:  155 - 165°F
• Initial cooling/cure:  48 - 72 hours before testing
• Wick series to consider:  CD; ECO is another option to test

Temperatures and fragrance loads are starting recommendations. Results can vary with your fragrance oil, container, wick, dye, and working environment.

How to Use AromaMax 700

1. Prepare your containers

Use clean, dry, heat-safe candle containers. Secure and center your selected wick before pouring.

2. Melt the wax

Using a double boiler or temperature-controlled wax melter, heat AromaMax 700 to approximately 175- 185°F. Stir occasionally to ensure the wax melts evenly. Add candle dye, if desired, and mix until fully incorporated.

3. Add fragrance oil

Add your measured fragrance oil while the wax is approximately 175 -185°F. Stir slowly and thoroughly for about 2 minutes to help distribute the fragrance evenly.

We recommend beginning your testing at an 8 - 10% fragrance load. While AromaMax 700 has a maximum fragrance capacity of up to 12%, adding more fragrance does not necessarily result in a stronger candle. 

4. Pour your candles

Allow the wax to cool to approximately 155 - 165°F before pouring slowly into your prepared containers. A starting temperature of 160°F works well for initial testing.

For the best appearance, let candles cool naturally at room temperature, away from drafts and rapid temperature changes. If necessary, adjust your pouring temperature slightly to improve glass adhesion and surface finish.

5. Allow to cool and cure

Allow candles to cool and rest for at least 48 - 72 hours before initial burn testing. For a more consistent evaluation of fragrance performance, you may also compare results after approximately 3 - 5 days.

6. Perform a complete test burn

Before selling or gifting your finished candles, test the complete combination of wax, fragrance, dye, wick, and container. Evaluate flame behavior, melt pool development, soot, and container temperature throughout the candle's usable life.

Recommended Wicks for AromaMax 700

CD wicks are our recommended first series to explore for AromaMax 700.  ECO wicks are another option worth testing.

Use the inside diameter of your candle container - not the advertised jar capacity - to select an initial wick size.

Suggested CD Wick Sizes to Begin Testing

Inside container diameter          CD wick sizes to test

2.5 inches                                    CD 8-10

3.0 inches                                    CD 10-12

3.5 inches                                    CD 14-16

4.0 inches                                    CD 18-20, or evaluate double wicking

These wick sizes are suggested starting points for testing, not guaranteed recommendations. Fragrance load, dye, container shape, and other variables may require a smaller or larger wick.

For best results, test neighboring sizes and evaluate the full burn life of each candle. Larger containers may benefit from double wicking.

Need help finding the right wick? Read our Guide to Candle Wicks for wick selection, sizing, and troubleshooting advice.

Candle Maker's Tips

Getting smooth tops: Pour within the suggested temperature range and allow your candles to cool slowly and evenly. Minor surface imperfections may be corrected with a heat gun.

Improving glass adhesion: Make sure containers are clean and dry. Slightly warming containers before pouring and testing small adjustments in pouring temperature may help reduce wet spots.

Improving fragrance throw: Review your fragrance load, mixing procedure, wick size, and curing time. More fragrance oil is not always the solution.

Reducing soot or mushrooming: Trim the wick before burning, avoid drafts, and test a smaller or different wick if the flame is too large or produces excess soot.

Frequently Asked Questions

Is AromaMax 700 a 100% soy wax?

No. AromaMax 700 is a para-soy blend containing approximately 52% soy wax and 48% paraffin. This combination is designed to provide the creamy appearance of soy with the fragrance performance of paraffin.

How much fragrance oil should I use?

We suggest starting at 8 -10% fragrance oil by weight of wax. For example, an 8% load equals 1.28 oz of fragrance oil per 16 oz of wax. AromaMax 700 can hold up to 12%, but the ideal amount depends on the fragrance and your finished candle's performance.

Does AromaMax 700 require a second pour?

Typically, no. AromaMax 700 is designed as a single-pour container wax. However, container dimensions, cooling conditions, and fragrance choices can affect the finished surface.

How long should I let my candles cure?

Allow at least 48 - 72 hours before initial testing. Testing fragrance performance again after approximately 3 - 5 days can help you determine the best curing schedule for your formulation.

Which wick works best with AromaMax 700?

CD wicks are a good starting series, with ECO wicks also worth evaluating. The correct size depends primarily on your container's inside diameter, along with fragrance load and other formulation variables. Consult our Wick Guide for more information.

Can I use AromaMax 700 to make pillar candles or wax melts?

AromaMax 700 is formulated primarily for container candles. For freestanding pillars or molded wax melts, we recommend selecting a wax developed for those applications, such as AromaMax 750.

Does this wax need additional additives?

No. AromaMax 700 is pre-blended and ready to use with compatible fragrance oils and candle dyes. Additional additives are generally unnecessary.

Choosing the Right Wax for Your Project

AromaMax 700 is an excellent option for makers who prefer a para-soy container wax. If you're comparing container waxes, natural wax blends, or waxes for pillars and melts, our Guide to Candle Wax can help you choose the right formula.

Available Sizes: 11 lb slab or 45 lb case.

Case Shipping: Flat-rate shipping of $20 per case to the contiguous United States. Case purchases are excluded from the complimentary fragrance sample offer.